Skip to product information
1 of 6

DTF Gang Sheet

DTF Gang Sheet

Available in a variety of sizes, our DTF Gang Sheets are the most cost effective solution when you have ready to print artwork. Upload a ready to print file and we will take care of the rest!

Regular price $7.00 USD
Regular price Sale price $7.00 USD
Sale Sold out
Size

We accept all file types, we always prefer vector files (all raster art uploads should be at least 300 dpi).

Printed & Shipped in the U.S.A. Delivered to Your doorstep, from central Florida!
View full details

Collapsible content

Pressing Instructions

To ensure your DTF transfer looks professionally pressed every time, follow these five simple steps.

No Pre-Pressing Or Pre-Ironing: You can if you want, but prepressing is unnecessary.

  1. Place it: Make sure to place your DTF transfer in the perfect place on your item. To ensure your transfer stays in place you can use the help of heat-resistant tape, this is highly recommended for hats and other non-flat surfaces. You can also us tools like alignment rulers to ensure level and even placement.
  2. Press it: Press your transfer with medium pressure at 310°F / 155°C for 15 seconds. Withing a reasonable span -increased heat, pressure, or time will not damage your transfer. However, too much heat can damage your garment. We suggest testing first and using a protective guard or parchment sheet to protect your garment from the direct contact from the iron.
  3. Cool it & Peel It: Next, let your transfer get cool to the touch (no less than of 15-30 seconds). Speed up cooling by using a cool air blower. Once the transfer has cooled, gently peel it back from one corner towards the opposite corner.

Ensures every piece of your design is adhering to the item by watching it as you peel it. If it is not, stop peeling immediately, and lay it back down and begin troubleshooting
(1.) If some or all of the transfer does not stick AND it was cool when peeling, there was not enough heat, pressure, or time. Re-Press your transfer with more time first (+5-10 seconds) and pressure.
(2.) If it is still not adhearing, increase the temperature 15°F at a time until you find the ideal temperature. Pressing multiple times will not damage the transfer..

Final Press & Wash Instructions: Place parchment paper or a single layer of t-shirt material over the print and press again for 15 seconds to soften the design, increase durability, and remove shine. For a shiny finish, cover with a protective guard sheet on the final press. Washing instructions; flip garment inside out, wash with cold water and dry with low heat or by hang drying.

Art Upload Recommendations

We accept all file types, we always prefer vector files (all raster art uploads should be at least 300 dpi).

Art Templates

Make sure you are submitting your art the right way by using one of our templates.

  • 22" x 2 Feet - AI / PDF 
  • 22" x 5 Feet - AI / PDF  
  • 22" x 10 Feet - AI / PDF 
  • 22" x 15 Feet - AI / PDF 
  • 22" x 20 Feet - AI / PDF

Shipping & Returns

Troubleshooting

Ensures every piece of your design is adhering to the item by watching it as you peel it. If it is not, stop peeling immediately, and lay it back down and begin troubleshooting


(1.) If some or all of the transfer does not stick AND it was cool when peeling, there was not enough heat, pressure, or time. Re-Press your transfer with more time first (+5-10 seconds) and pressure.


(2.) If it is still not adhearing, increase the temperature 15°F at a time until you find the ideal temperature. Pressing multiple times will not damage the transfer..

  • Place it

    Make sure your DTF transfer is on the product exactly where you want it.

  • Press it

    Press with medium pressure at 320°F / 160°C for 15 seconds.

  • Peal it

    Let it sit for about 15 seconds and peel away the backing and voilà.